MX104G preparation for flight

First link mobile to drone wifi
Then return to the current page

1. GPS set to ON
   Depress Controller Lock Button and switch on (two beeps)
    
   
2. Switch on A/C - 3 sec press (Will be same later for off)
   Wait for long beep from controller and bars showing on its LCD
    
   
3. Wait 8 sec until two short beeps (lights flashing yellow)
   Rotate A/C three turns horizontally (lights flashing green)
   Rotate A/C three turns vertically (lights solid 2 green + 2 red)
    
   
4. Short press on Controller Lock Button (A/C rotors will spin)
   Short press on Takeoff Button (A/C will climb to 1.5m)
   (A similar press can later start auto-landing)
    
   
5. Now clear to fly
   

   ---

6. Fly back to landing area at 1-2m height
7. Either press Takeoff Button or reduce height to zero
8. Hold left stick back for 3 sec to cut motors

Last updated 15.7.2020